How to Factory Reset Your VSSL Device

A factory reset triggers a full reset of all previously customized VSSL settings. This step is necessary when making any changes to your existing network, moving the device to a different network entirely, or simply when experiencing unordinary behavior. Completing a factory reset will require you to re-set up your VSSL unit. You will also need to reapply any EQ, Max Volume, Analog Input Names, or other device settings. 

VSSL amplifiers can be factory reset in two different ways: 

Factory Reset Through VSSL App

To trigger a factory reset without having to use the physical button, open the VSSL app -> select the settings page -> click into the settings for the device you want to reset -> select 'Factory Reset' at the bottom of the page 

Physical Reset Button

In some instances where there may be issues with the connection of the VSSL app and the device, you will need to utilize the physical button located on the back of the unit (All X Series amps will have a physical button on the back of the unit). 

To complete the reset, you will need to use a small pin or paperclip to press and hold the reset button. Press and hold the button for 10-15 seconds or until all zone lights start flashing pink. 

Note: All VSSL units will have a reset button on the back of the unit except for the A.6 (1st Gen).